RiggingWarehouse.com
Click Here for Free Shipping Info
Search
   Advanced Search
Sales and Customer Service 1.877.331.3280
Quick Order Pad
Product Code Quantity
   
   
Search within these results for:

New One-Piece Mandrel features an improved web slot radius which will reduce cutting and abrasion on webbing and extend the life of the strap

  • Kinedyne® Portable Webbing Winches
  • Resistant to ‘egging’ or elongation of mandrel cap holes which will help improve winch bar operator safety
  • Kinedyne winches are made using steel material that is subjected to a stringent Quality Assurance process
  • All components are attached to the frame using robotic welders for manufacturing consistency
  • Manufacturing date and lot code are permanently stamped on winch frame
  • Standard 1820P2:
    • Working Load Limit: 5,500 lbs./2500 kgs.
    • Weight: 9.2 lbs., 4.2 kgs.
  • Low Profile 7820P2:
    • Working Load Limit: 5,500 lbs./2500 kgs.
    • Weight: 9.2 lbs., 4.2 kgs.
  • Winches & Winch/Combination BarsWARNING: When tightening or loosening winches, always maintain a firm grip on the winch bar. Never release a winch bar without checking the pawl to ensure that it is fully engaged between ratchet teeth. Releasing a winch bar without the pawl being properly engaged can cause serious injury to the user or bystanders. The use of a slip resistant handle winch bar, specifically designed to tighten or loosen winches, is recommended. Kinedyne winch bars (page 9) shall be used to tension and release tie-down assemblies. “Cheater Bars” (“extenders”) shall not be used with the winch bars. User shall stand clear of the winch bar handle during operation of the winch bar in case the winch bar slips. The tip of the winch bar shall be inserted through both holes in the end cap to prevent the winch bar from “slipping out” and overloading the tip and/or end cap. Winches shall not be loaded in excess of their working load limit. Winches shall not be used as pulling or lifting devices. A minimum of 12” of webbing shall be inserted through the slot, and a minimum of two (2) wraps shall be on the winch mandrel.CAUTION: Excessive wraps of webbing on the mandrel will reduce the working load limit of the winch.PORTABLE WINCH WARNING: Set screws on portable winches are designed to position the winch while the tie-down assembly is being tightened. They shall only be snug tight. Overtightening of screws may cause the bracket to bend, weakening the winch and causing it to fail. Portable winches shall be removed and stored when not in use.
  • Industry First Three Year Warranty as standard on all Kinedyne cast mandrel winch products




















Item ID & DescriptionUnit SizeQuantity
316-1820P2
Kinedyne® Winch Portable Standard1
316-7820P2
Low Profile Portable Web Winch E-Coated1