CM 7/16" Alloy Screw Pin Anchor Shackle (WLL 2.60 ton) (Hot Dip Galvanized)

Columbus McKinnon (CM) Alloy Screw Pin Anchor Shackles are designed with a 5:1 design factor and have a strength rating approximately 50% higher than a comparable-sized carbon shackle and about 25% stronger than super strong shackles. Anchor shackles can be side loaded or used for multiple connections.

• Size (Shackle Body Thickness): 7/16"
• Working Load Limit (WLL): 2.60 tons (5200 lbs)
• Pin Size: 0.50"
• Pin Type: Screw Pin
• Throat Opening (Width Between Ears): 0.72"
• Throat Depth: 1.69"
• Material: Alloy Steel Body & Alloy Steel Pin
• Finish: Hot Dip Galvanized
• Working load limit and traceability codes shown as permanent markings on body
• Manufactured from domestic (USA) Special Bar Quality (SBQ) steel having fine grain, reduced sulfur and phosphorus
• Alloy quenched and tempered pins
• Shackles meet dimensional requirements and exceed performance requirements of RR-C-271
• 5:1 design factor
• Meets or exceeds the performance requirements of ASME B30.26, ANSI B18, EN 13889, & ISO 2415
• Made in the USA