Crosby HR-125M Metric Swivel Hoist Ring top washers have the following features: The Working Load Limit and Recommended Torque value are permanently stamped into each washer. Washer is color coded for easy identification: Silver = Metric thread.

Features:

• 360° swivel and 180° pivot action
• Washer is color-coded for easy identification: Silver - Metric thread
• Bolt specification is a Grade 12.9 alloy socket head cap screw to ISO 4762
• Designed to be used at full WLL within angular loading range
• Designed to be used with ferrous workpiece only

Specifications:

• Bolt Diameter/Thread: M24 X 3.00
• Effective Thread Projection Length: 32.8mm
• Bolt Length (from under head): 80mm
• Radius (E): 34.7mm
• Diameter (F): 25.4mm
• Finish: Zinc Plated (yellow chromate)
• Material: Alloy Steel (Quenched & Tempered)
• Torque: 230 ft-lbs
• Design Factor 4:1
• Standards & Ceritfications: ASME B30.26

NOTE: These hoist rings meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26