Crosby A-342 Weldless Alloy Master Links are individually proof tested. Each link has a Product Identification Code (PIC) for material traceability. Crosby A-342 Master Links feature Crosby's patented QUIC-CHECK® deformation indicators.

Features:

• Alloy steel — Quenched & Tempered
• Individually Proof Tested to values shown, with certification
• Proof Tested with special fixtures sized to prevent localized point loading
• Forgings have a Product Identification Code (PIC) for material traceability, along with the size, the name Crosby and USA in raised lettering
• Selected sizes designated with “W” in the size column have enlarged inside dimensions to allow additional room for sling hardware and crane hook
• Crosby 7/8" to 2" A-342 master links are type approved to DNV-ST-E271-2.7-1 Offshore Containers
• Incorporates patented QUIC-CHECK® deformation indicators
• Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit
• Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements

Specifications:

• Size: 7/8" W
• Inside Width: 3.75"
• Inside Length: 6.38"
• Material: Alloy Steel
• Working Load Limit: 15,200 lbs (3.3 tons)
• Design Factor 5:1 (based on in-line load or ?120° included angle)
• Standards & Certifications: ASME B30.26

NOTE: These links meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.