Click Here for Free Shipping Info
   Advanced Search
Sales and Customer Service 1.877.331.3280
Quick Order Pad
Product Code Quantity
Search within these results for:

Use the Locoloc® "Go" "No/Go" Gauge to assure proper swaging of Locoloc aluminum, copper and stainless steel sleeves. These simple "Go" "No-Go" gauges will determine if your Locoloc tools are out of adjustment or alignment.

  • Locoloc Sleeve Gauges GA-1P will measure all oval or stop sleeves used on 1/32", 3/64", 1/16", 3/32", 1/8", 5/32", and 3/16" oval and stop sleeves.
  • Easy to Use:
    • Cable assembly should hold the rated breaking strength of the cable when oval sleeves are used to form a loop or eye in a cable assembly.
    • When proper slot in gauge slips over compressed area of sleeve after swaging then swage is satisfactory.
    • If proper slot does not fit over compressed area of sleeve after swaging, then tool is not properly calibrated.
  • Stop sleeves must be properly compressed and gauged to reach their rated loads which is 1/3 to 1/2 the breaking strength of the cable, depending on the cable diameter.
  • Made in the USA.

Item ID & DescriptionUnit SizeQuantity
Locoloc® No/Go Gauge For 1Sc And 1Bsc1
Locoloc® No/Go Gauge For 1/4 & 5/16 Tool1